![Metal Fuel Spontaneous Electric Power Source New Energy Environmental Protection and Pollution](/uploads/s/7b1f682951454024a684f0aa0e104e21.webp)
Metal Fuel Spontaneous Electric Power Source New Energy Environmental Protection and Pollution
Basic Info. Advantages: 1)Storage life longer than 10 years2)Zero attenuation of stored non attenuated electricity3)Easy
Description
Basic Info
Model NO. | HG-M20-600 |
Transport Package | Standard Export Package |
Specification | 170(L)*110(W)*230(H) |
Trademark | higreater |
Origin | China |
Production Capacity | 1000PCS/Month |
Product Description
Basic Info.
Material | Stainless steel+ABS | Batterry Type | Magnesium Air battery |
Transport Package | Standard Export Package | Specification | 170(L)*110(W)*230(H) |
Trademark | Higreater | Weight | 2.4kg |
Production Capacity | 1000piece/Month | Origin | China |
Advantages:
1)Storage life longer than 10 years2)Zero attenuation of stored non attenuated electricity3)Easy to use 4)With sufficient energy, meet 40 mobile phones charging demands 5)Off grid power generation does not depend on the grid6)Long lasting power generation, convenient and fast fuel replacement7)High concealment without high temperature and noise8)Zero pollution and no harmful substances9)Small and portable, small size and light weight10)Human contact with friendly neutral saline11)Environmentally friendly and pollution-free substances12)Resource friendly, large reserves and cheap materials13)Safe and reliable without risk of ignition and explosion
Application Scenarios:
Use direction:
1) Prepare 700ml of brine (about 10% concentration);
2) Open the latch, lift the upper cover of the battery, and confirm that the integrated plug is inserted in place, and the power supply is fast
The plug is connected;
3) Unscrew 6 vent valves, inject liquid into 6 battery cavities respectively, and add liquid to
It can be done without passing the metal plate (about 110ml for each monomer);
4) Close the upper cover of the battery, fasten the lock, press the power supply button, the power display lamp will display normally, and the battery activation is completed.
5) The battery is used for about 4h, and the liquid needs to be replaced;6) Press the button to cut off the power supply, open the upper cover of the battery, pull out the power quick plug, and removeLower the upper cover of the battery;7) Pull out the integrated plug, and then pull up the upper cover of the battery inner core from both sides of the battery inner core;8) Dump the waste liquid and flush it.
9) Replace the components in turn, repeat the battery activation mode in 3.1, and complete the liquid change operation.
Patent certificates:
Prev: Portable Three Phase AC Voltage and Current Source
Next: Rechargeable COB 3 Light Modes Keychain Light Mini Flashlight
Our Contact
Send now